incline construction hoist

The inclined construction hoist is produced to meet the construction needs of special-shaped buildings. The cage should always be kept vertical during operation. The guide rail frame is installed obliquely according to the needs of the building. The cage has two force-bearing columns and a cage. The frame is made into an inclined form, and its inclination is consistent with the guide rail frame.

Item	Construction hoist
Model	SC200
Maximum tilt angle	12°
Lifting speed	0-33m/min
Cage size	3.21.52.25m
Motor power	2*12kw
Speed ratio	1:18
Invertor Power	37 kw
Safety device	SAJ40-1.2
Mast section size	0.650.651.508m
Max. Installation height	250m
Cable type	Conductor bar

Feature

In order to meet the needs of the construction of inclined buildings such as bridges and chimneys, the inclined construction lifter installs the guide rails in an inclined manner according to the shape of the building, while the cage is kept horizontal and runs up and down along the inclined guide rails.

1. The rail frame can be installed within the range of inclination angle below 12° (customization is required for more than 12°);

　　2. The design of the structural parts such as the hanging cage, the guide rail frame, and the wall system has been analyzed by computer finite element, and the structural force is in good condition;

3. Two drives in the cage, high efficiency transmission, stable and reliable starting and braking;

4. Ten safety limits are set, and single gear safety device is adopted, which has high safety;

5. Adopting a new type of cable traction method, and equipped with a dense cable protection frame, the cable accompanying is more reliable;

6. The maximum erection height is 150 meters, and the heavy-duty standard section is adopted, which can be increased to 250 meters;